RESTORE Vision Locator
Sonde, pipe, and cable locator for professional fieldwork
RESTORE Vision Locator (TPL200) shows where the camera head is located relative to the ground surface. The camera's sonde transmits a signal that Vision Locator receives and displays the strength of, helping the operator map the pipe's route, choose the right spot for excavation or access, and locate observations from the inspection. Vision Locator is a multi-frequency locator supporting several active locating modes as well as passive modes for certain live power lines and lines carrying detectable radio signals.
Features
- Locate the camera head – pinpoint its position relative to the ground surface, whether or not a fault has been detected.
- Follow the line's route – trace the signal step by step for a better understanding of how the pipe or cable runs underground.
- Plan excavation and access – mark where to dig or open an excavation to reach the right part of the pipe.
- Broad compatibility – support for multiple locating frequencies lets the locator be used with various compatible sondes and transmitters.
- Clear feedback – a percentage signal level on screen is combined with audio via speaker or headphones.
- A full workday per charge – up to approximately 10 hours of runtime, charged via USB-C.
Specifications
- Product name / model
- RESTORE Vision Locator / TPL200
- Active locating frequencies
- 512 Hz / 640 Hz / 33 kHz
- Passive power line detection
- 50/60 Hz
- Passive radio frequencies
- 6–22 kHz
- Rated reception range
- Up to 10 m in open terrain
- Signal display
- Percentage signal level on LCD screen
- Ingress protection
- IP65 – dust-tight and protected against water jets; not intended for submersion
- Operating temperature
- −10 to +50 °C
- Battery
- Built-in 7.4 V / 2,200 mAh lithium-ion battery
- Runtime / charging
- Up to approx. 10 hours / approx. 3 hours via USB-C
- Dimensions / weight
- 690 × 240 × 110 mm / approx. 2 kg
